|
| |
|
|
Steam Turbine Revision
Potměšil, Tomáš ; Novotný, Zdeněk (referee) ; Fiedler, Jan (advisor)
This work deals with current application of the developing field of post-warranty service of old turbines in the energy sector. There are described various types of repairs following the recommendations of commonly performed actions. Revision finding is focused on back-pressure steam turbine marked R12-9 / 2, which was scheduled for overhaul after 180 000 operating hours. Revision findings include a detailed description of the turbine and method of repair. It is also performed calculating the losses in the axial blade stage of cascade by AMDC-KO methodology on because of the choice type of blading and then comparing by technical justification for the choice of one of the variants for the customer.
|
|
|
Degradation test of polymer material
Chleboun, Jiří ; Gvritishvili, Roman (referee) ; Vaněk, Jiří (advisor)
Basic knowledge of photovoltaic energy transformation, devices and materials, used in photovoltaics are summarized in this master’s thesis. Sort of degradation factors and its consequences of the photovoltaic panels are described there. Detail reviews of degradation tests are processed at the end of theoretical part. The main purpose of this research is selected covering materials dielectric properties change monitoring. These covering materials were influenced of accelerated thermal aging and increased humidity.
|
|
|
Study of electric properties of composite
Bariš, Marián ; Havlíček, Svatopluk (referee) ; Polsterová, Helena (advisor)
The theme of this Bachelor's thesis is a problematics of composite materials. On a given samples of polyamide with a various weight filling of a milled mica were measured resistivity, permittivity and loss factor on a consequence of a temperature and filling. The chosen type was a filling with a milled mica in range from 0 to 40 of a weight percentage, temperatures were in range from 20 °C to 90 °C.
|
|
|
Study of electric properties of nanocomposit material
Ovsík, Jiří ; Rozsívalová, Zdenka (referee) ; Polsterová, Helena (advisor)
This work deals with the electrical properties of nanocomposite materials. Samples for the experiment are made of epoxy resin as matrix and titanium dioxide TiO2 as nanofillers in varying percentage performance. Measurements are temperature dependent components of the permittivity, dissipation factor and resistivity. Furthermore, the internal resistivity is observed with regard to the percentage performance of a sample of nanoparticles.
|
|
|
Dielectric Properties of Thermoplastic Materials with Ground Mica
Fiala, Ivo ; Havlíček, Svatopluk (referee) ; Polsterová, Helena (advisor)
The subject of this thesis are composite materials, measuring of their dielectric qualities, particularly of the polyamide and the polyamide filled with various weight percentage of the ground mica. The essential intent of the thesis is to determine the measuring methodology and respective measurement of the basic dielectrical quantities of materials, as are loss factor and the complex permitivity components. The measuring should be done for various temperature and humidity combinations. The thesic contains the physical explanation of measured dependences.
|
|
|
Dielectric properties of epoxy with nano particle
Ráček, Tomáš ; Rozsívalová, Zdenka (referee) ; Polsterová, Helena (advisor)
This diploma thesis is focused on the analysis of basic problematics of dielectrics and nanocomposites. It describes the fabrication of experimental samples of nanocomposites from sealing epoxy resin and nanoparticles of titanium dioxide with various weight filling. Further, the thesis deals with measuring and evaluation of dielectric properties of the samples. It examines the influence of weight filling, temperature and frequency of the electric field on volume resistivity, relative permitivity and loss factor.
|
|
|
Dielectric Relaxation Spectroscopy of Composite Systems
Holcman, Vladimír ; Liedermann, Karel (advisor)
The subject of this doctoral thesis is the study of dielectric properties of a binary composite made up of a polymer matrix and metallic filler. Properties of such composites have been extensively examined in the past and they turned out to depend on temperature, frequency and in particular on filler concentration. The objective of this work was first to experimentally establish and second to describe quantitatively the effect of the size of metallic particles on the properties of the composite concerned, yet at the same filler concentration. This study was carried out on the model system ethylene-vinylacetate copolymer – nickel. The acquisition of experimental results required extensive measurements in a wide frequency and temperature interval, as well as a manufacture and preparation of a large set of samples with different concentrations and Ni filler sizes. Measurements were in part carried out at the Centre for Electronic Correlations and Magnetism, Institute of Experimental Physics V of the University of Augsburg (Germany) and, after the installation of a new cryogenic system, at the Department of Physics at FEEC, BUT Brno. Measurements were performed on a number of meters (Alpha-Analyzer of Novocontrol, HP4284A and HP4285A of Hewlett Packard and E4991A of Agilent) in the frequency range 1 Hz – 1 MHz and in the temperature interval 10 K – 300 K. The nickel concentration in systems studied varied from 0 % to 75 % and nickel particles were of a spherical shape with diameters between 35 and 115 m. The measurement results have shown that in the above frequency and temperature window just a single relaxation and a single conductivity mechanism occur. It was also proved that the frequency dependence of complex permittivity is for different Ni particle sizes at the same concentration different. These results have been quantified and a simple mathematical formula based on the Lichtenecker mixture rule has been proposed for their description. The physical origin of the effect of particle size at the same total nickel concentration is sought in different surface areas of internal interfaces between nickel and polymer in the composite
|
|
|
Insulation and dielectric properties of water
Grill, Jiří ; Frk, Martin (referee) ; Špinka, Jiří (advisor)
This master´s thesis deals about insulation and dielectric properties of water. It describes the structure of water, covalent and hydrogen bonds. It outlines primary chemical and physical properties of water and then it describes parameters of water - dynamic viscosity, conductivity, surface tension, pH and also describes dielectric properties - dielectric loss, loss factor, permittivity, polarization. Part of the work is practical section, which includes measurements of deionized water, destilled water, tap water and shows primary dependence such as dependence loss factor on frequency or relative permittivity on frequency.
|
|
|
Monitoring properties of nanocomposites on base epoxy
Libra, Miroslav ; Rozsívalová, Zdenka (referee) ; Polsterová, Helena (advisor)
The present thesis deals with the study of nanotechnology in the field of composite materials (nanocomposites). Furthermore, the production, composition and electrical properties of these materials. Samples for the experiment are made of epoxy resin as matrix and titanium dioxide TiO2 as fillers with different benefits. Are the measurements the temperature dependence of permittivity, loss factor and internal resistivity.
|
guest ::
